Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Worth?
Garage door work in Worth typically runs $150 – $600 for a repair, while a full new door installation usually lands between $700 and $2200. Most Worth homeowners calling about a door that won’t open end up in the $180 – $340 range for a spring replacement, or $120 – $320 for an opener fix. Those are typical estimated ranges for this market; the written estimate we give you after looking at the door sets the final price.
What you pay depends on the part, the door, and how far the problem has spread. A single broken torsion spring is a quick, contained job. A bent track that has been dragging on the rollers for a season is a bigger one. We quote per job, the estimate is free, and we tell you what we found before any work starts.
Key Takeaways
- Typical garage door repair in Worth: $150 – $600, depending on the component.
- One spring: $180 – $340. A matched pair is usually replaced together, so a pair costs about twice that.
- New door installation: $700 – $2200, driven mostly by door size and material.
- Opener repair ($120 – $320) is often cheaper than replacing the unit ($250 – $550).
- Free estimates, and the written estimate is the price.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs cost in Worth this year. These are typical estimated ranges, not a menu; the estimate we write for your door is what you pay.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Spring repair (matched pair) | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A few things push a Worth job toward the top of its range. A door with two springs usually needs both replaced at once, since a matched pair wears at the same rate and leaving one old spring in place just sets up a second call. Doors that have been out of alignment for a while often need track work and roller work together, not just one. And a heavy wood door or an oversized opening takes more time and heavier hardware than a standard steel door, which shows up in the number.
What pulls the price down is catching a problem early. A worn roller is a small job. A worn roller that has chewed up the track is two jobs. If your door is noisy, running slow, or stopping halfway, it’s worth having it looked at before the small problem becomes a structural one.
What Affects Garage Door Pricing in Worth
- Which component failed. Springs, cables, rollers, tracks, and openers all carry different price bands. Springs and cables are the safety-critical parts; rollers and tracks are mechanical wear items. Knowing which one you’re dealing with is the first step toward an accurate number.
- One spring or two. Many doors use a pair of torsion springs. When one breaks, replacing both is the standard approach, so the price roughly doubles. We’ll tell you which setup your door has before quoting.
- Door size and material. A single-car steel door and a double-car wood door are different jobs. Material affects both the parts cost and the weight the hardware has to carry.
- Condition of the surrounding hardware. A repair on a door that’s otherwise in good shape stays in the lower range. If the hinges, rollers, and tracks are all worn, the estimate reflects the whole system.
- Whether it’s a repair or a replacement. A door that’s cracked, sagging, or repeatedly failing may cost less over time to replace than to keep patching. We’ll give you both numbers so you can compare.
- Brand and opener age. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment regularly, so diagnostics are quick and parts are the right ones. A legacy Craftsman opener and a current LiftMaster smart system get the same careful diagnosis, and the quote reflects the actual part needed, not a guess.
For more on the repair side of this work, see our garage door repair Mount Greenwood page, which covers what a typical repair visit involves.
Spring Repair: Why It Costs What It Costs
Spring repair in Worth runs $180 – $340 for one spring, and it’s the single most common job we’re called for. The price reflects the part, the labor, and the fact that a torsion spring is under serious tension when it’s installed and removed. That tension is what lifts the door, and it’s what makes the job dangerous. A spring under load can release stored energy suddenly, and the tools and training to handle it safely are part of why this isn’t a DIY job.
Our technicians have up to 10 years of experience with high-tension torsion and extension spring work, and we treat it as a core service rather than something to hand off. If you hear a loud bang from the garage and the door won’t lift, that’s usually a broken spring. Don’t force the door; call us and we’ll take a look.
For a fuller explanation of how spring systems work and what to expect, our guide to garage door spring repair walks through the process.
Opener Repair vs. Replacement: Which Is Cheaper?
Opener repair in Worth typically costs $120 – $320, while a full opener installation runs $250 – $550. When the motor is fine but a gear, capacitor, or logic board has failed, repair is almost always the cheaper path. When the unit is old enough that parts are hard to find, or the drive system is worn out, replacement makes more financial sense.
We service LiftMaster, Chamberlain, Genie, and Craftsman openers, among others, so we can diagnose by brand logic rather than guesswork. A Genie with a stripped gear and a Chamberlain with a failing wall control are different problems, and they get different answers. If you’re considering a new opener, our garage door opener installation guide covers what’s involved.
How to Save on Garage Door Repair in Worth
The biggest savings come from acting early and getting a clear diagnosis before agreeing to anything.
- Get the estimate in writing. We give free estimates, and the written estimate is the price. No surprises after the fact.
- Repair before replace when the door is structurally sound. Restoring what you have is often the right call, especially on a door that’s a few years old and otherwise solid.
- Replace springs in pairs. Paying for one spring now and the second one in a few months costs more in total than doing both together.
- Ask about the rollers and hinges while we’re there. If a technician is already on site, replacing a set of worn rollers is far cheaper than a separate visit later.
- Don’t ignore a noisy or slow door. A door that’s grinding or lagging is usually telling you a part is wearing. Fixing it now is a small job.
- Call (855) 914-9447. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, means we can often get to you quickly. Free estimates, and the number we quote is the number you pay.
Parts and Brands: What We Work On
We’re garage door specialists, not a general handyman service. That matters when your door is a specific brand with specific parts. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and we source parts directly rather than improvising or sending you to a supplier. That cuts down on the “we have to order that” delays that leave a door stuck open or closed for days.
If you’re weighing a repair against a new door, our garage door installation guide covers the options and what each one involves.
FAQs – Garage Door Cost in Worth
How much does a garage door repair cost in Worth?
Most garage door repairs in Worth fall between $150 and $600. A spring replacement is typically $180 – $340, a cable repair $130 – $250, and an opener repair $120 – $320. The exact price depends on the part and the door; the written estimate sets it. Call (855) 914-9447 for a free estimate.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door panels, tracks, and frame are sound: a repair typically runs $150 – $600, while a new door installation runs $700 – $2200. Replacement makes more sense when the door is cracked, sagging, or repeatedly failing. We’ll quote both so you can compare directly. Call (855) 914-9447 and we’ll walk you through it.
How much does spring repair cost in Worth?
One spring costs $180 – $340. Because springs are usually replaced as a matched pair, a pair costs about twice that range. Spring work is high-tension and safety-critical, so it’s not a job to attempt yourself. Call (855) 914-9447 for an exact quote; estimates are free.
Can you come today?
Often, yes. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, means we can frequently get a technician to you the same day. A call outside dispatch hours is booked into the next opening. Call (855) 914-9447 to check availability.
How much does a new garage door cost in Worth?
A new door installation in Worth typically runs $700 – $2200, depending mostly on door size and material. A standard single-car steel door sits near the lower end; a larger or wood door sits near the top. The written estimate sets the final price, and our garage door installation guide covers what to expect. Call (855) 914-9447 for a free estimate.
What Happens When You Call
When you call (855) 914-9447, we ask a few questions about the door and the symptom, then set up a time for a technician to come out. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. On site, the technician diagnoses the problem, explains what’s needed, and gives you a written estimate before any work begins. The estimate is free, and the written number is the price.
We work on the door you already own, and we carry and source parts for the major brands, so most repairs can be done without a long wait. If the door needs to be replaced, we’ll tell you that too, with a number to compare against the repair.
Related Pages
- garage door repair in Orland Park – nearby service area pricing and common repairs.
- garage door repair in Oak Lawn – what homeowners there typically pay.
- garage door repair in Alsip – local cost guide for spring and opener work.
- garage door repair in Blue Island – repair ranges and what affects them.
- garage door repair in Palos Hills – spring, cable, and opener pricing.
- garage door repair in Chicago Ridge – typical estimates for common jobs.
- garage door spring repair – how torsion and extension springs work.
- garage door opener installation – repair vs. replace and what’s involved.
- garage door installation – sizing, materials, and cost factors.
- garage door cable repair – when a frayed cable needs attention.
- garage door panel replacement – matching panels and when to swap one.
- garage door track realignment – repairing a bent or off-track door.
If your door is stuck, noisy, or just not lifting the way it should, call (855) 914-9447 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll diagnose the problem, give you a written price, and fix it with the right part for your brand.
Pricing reflects the Worth market as of 2026. Garage Door Repair Mount Greenwood offers free estimates – call (855) 914-9447.
Written by the team at Garage Door Repair Mount Greenwood.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Daniel Thompson"Asked a lot of questions before he came out, which I thought was a good sign. Turned out he was right about what the problem probably was, so it was a quick fix once he got here."
- Laura Padgett"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Lisa Whitaker