Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Burbank?
Garage door work in Burbank typically costs $150 – $600, depending on what’s actually broken. A single torsion spring replacement usually lands between $180 and $340, cable repair between $130 and $250, and a new door installation runs $700 – $2,200. Those are estimated ranges for this market; the written estimate we give you after looking at the door sets the final price.
Here’s the part most price guides skip: the number you pay depends far more on the component than on the neighborhood. Two doors on the same Burbank block, both “not working,” can be a $150 roller job and a $500 panel replacement. We diagnose by brand and component first, then quote the part and labor together, so you know what you’re paying for before anyone touches the door.
Key Takeaways
- Typical garage door repair in Burbank: $150 – $600.
- Spring repair (one spring): $180 – $340. A matched pair is usually replaced together, so a pair runs about twice that.
- Opener repair: $120 – $320. Opener installation: $250 – $550.
- New door installation: $700 – $2,200, sized and spec’d to your opening.
- Estimates are free. Call (855) 914-9447. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Cost Breakdown (2026)
These are typical estimated ranges for Burbank in 2026. Every job is quoted per job by written estimate, and the estimate is what you pay.
| Service | Typical Estimated Range | What It Usually Covers |
|---|---|---|
| Garage Door Repair (general) | $150 – $600 | Diagnosis plus the specific fix, from a single component to a section of hardware |
| Spring Repair (one spring) | $180 – $340 | High-tension torsion or extension spring replacement, one spring |
| Cable Repair | $130 – $250 | Lift cable replacement and re-tensioning, per side |
| Opener Repair | $120 – $320 | Repair of the existing unit: logic board, gear, travel, remote/safety sensor issues |
| Opener Installation | $250 – $550 | New opener installed and calibrated to the existing door |
| Panel Replacement | $250 – $500 | One damaged section replaced with a matching panel |
| Track Realignment | $120 – $240 | Straightening and re-securing bent or knocked-out track |
| Roller Replacement | $110 – $220 | Full set of rollers swapped and the door re-balanced |
| New Door Installation | $700 – $2,200 | Door, hardware, and install, sized to the opening |
A quick note on springs, because this is where price guides mislead people most. The $180 – $340 range is for one spring. Most modern doors carry a matched pair, and when one breaks the other has taken the same cycles, so it’s usually replaced at the same time. Budget roughly double the single-spring range for a pair. We’ll tell you honestly whether your door is a one-spring or two-spring setup and quote it that way.
What pushes a job toward the top of a range: a door that’s been running on a bent track for months, a panel that needs a color match from a specific manufacturer line, or an opener problem that turns out to be two failed components rather than one. What keeps it at the bottom: a single worn roller set, a misaligned safety sensor, a clean single-spring swap on a door that’s otherwise sound.
What Affects Garage Door Pricing in Burbank
Burbank is a compact, mostly residential village with a lot of older housing stock sitting alongside newer construction. That mix shows up in garage door pricing in ways that are specific to this town.
- The era of the house. Older garages in Burbank often have narrower openings and legacy hardware. A Wayne Dalton or Craftsman system from an earlier generation needs a technician who knows that hardware, not one who has to look up the model and guess. Brand-specific diagnostics keep you from paying for trial-and-error labor.
- Door material and manufacturer. A steel Clopay or Amarr panel is generally easier and cheaper to match than a discontinued line where the replacement section has to be sourced. This is where parts supply matters: a company that sources components directly can often get you a matched panel instead of quoting a full door.
- Number of springs. As above – one spring or a matched pair roughly doubles the spring line item. It’s the single biggest swing in a typical repair quote.
- Opener type. A current smart-home opener from LiftMaster, Chamberlain, or Genie is a straightforward repair or swap. A legacy mechanical unit can take longer to diagnose but is often still repairable rather than replaceable – which usually costs less than a new unit.
- Whether the door is worth restoring. A sound door with a failed spring, worn rollers, and a tired opener is a repair job. A door with rusted-through panels, a cracked section, and a bent track starts to approach installation territory. We’ll tell you which side of that line you’re on.
- Access and clearance. Tight alleys, low-clearance garage ceilings, and doors that open onto a slope all affect how long a job takes and what hardware fits.
Repair or Replace? How to Decide in Burbank
Most of the time, repair wins on cost. A $180 – $340 spring replacement on a door that’s otherwise solid is obviously cheaper than a $700 – $2,200 new door. The math only flips when the door itself is failing structurally – multiple bad panels, a bent track that won’t hold alignment, or hardware that’s no longer made and can’t be sourced.
Our default is to restore what you have. Garage door specialists who also supply parts can often rescue a door that a generalist would write off simply because they can source the right component. If a door genuinely needs replacing, we’ll show you why, and we’ll quote installation on a door from one of the eight major lines we work with rather than steering you toward whatever happens to be on hand.
For a closer look at how we approach repair work specifically, see our garage door repair Mount Greenwood page, which walks through the component-level side of the job.
How to Save on Garage Door Costs in Burbank
There’s no secret discount here – just a handful of decisions that keep the bill down without cutting corners.
- Fix the small thing before it becomes the big thing. A worn roller set at $110 – $220 is cheap. Letting it grind for a year can take the track and the opener with it, and then you’re paying for both.
- Get the diagnosis right the first time. A technician who knows your brand saves you the cost of guesswork. Tell us the make and model when you call – Clopay, Amarr, LiftMaster, Chamberlain, Genie, Wayne Dalton, Craftsman, or Raynor – and we’ll come prepared.
- Replace springs as a pair. It’s tempting to swap only the broken one, but the second spring has the same cycles on it. Doing both now avoids a second service visit later.
- Ask whether the opener can be repaired. Full-unit replacement is the easy answer; repairing the existing unit often costs less. We treat opener repair as its own specialty for exactly this reason.
- Take the free estimate seriously. A written estimate tells you the actual number before work begins. Call (855) 914-9447 and we’ll quote it properly.
Safety Around Springs and Cables: Why This Isn’t a DIY Line Item
Torsion springs and lift cables are under extreme tension, and they’re the one part of a garage door system that genuinely injures people who try to handle them without the right tools and training. We won’t walk you through replacing a spring yourself, and no reputable garage door specialist will either. What you can safely do is look and listen: a snapped spring usually shows an obvious gap in the coil, a door that slams down hard is a spring or cable problem, and a door that hangs crooked points to a cable or track issue. If you see any of those, keep clear of the door and call a trained professional.
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
What Happens When You Call
You describe the door and what it’s doing. We ask about the brand, the opener, and the symptom. Then we schedule a visit for a free estimate, and you get a written number before any work starts. Our technicians have up to 10 years of experience, and they carry the brand knowledge to diagnose your door on the spot rather than order parts and come back. The local pro who performs the work is licensed and insured as their state requires.
Call (855) 914-9447. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Garage Door Costs in Burbank
How much does garage door repair cost in Burbank?
Garage door repair in Burbank typically runs $150 – $600, depending on the component. A single spring replacement is usually $180 – $340, cable repair $130 – $250, and roller replacement $110 – $220. Call (855) 914-9447 for an exact quote – estimates are free.
How much does garage door spring replacement cost in Burbank?
One spring costs an estimated $180 – $340. If your door has a matched pair, which is common, expect roughly double that range since both are usually replaced together. Call (855) 914-9447 to confirm your setup and get a written number – estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper: a typical repair is $150 – $600 versus $700 – $2,200 for a new door. Replacement only makes sense when the door’s panels, track, and hardware are all failing at once. Call (855) 914-9447 and we’ll tell you honestly which side you’re on – estimates are free.
How much does a new garage door opener cost in Burbank?
Opener repair runs an estimated $120 – $320, and a new opener installed runs $250 – $550. Repairing the existing unit is often the lower-cost path, so it’s worth asking before replacing. Call (855) 914-9447 for an exact quote – estimates are free.
Can you come today?
Same-day service is often possible. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and a call outside those hours is booked into the next opening. Call (855) 914-9447 to check availability and get a free estimate.
Garage door work in Burbank doesn’t have to be a guessing game. We quote the part, the labor, and the total in writing before anything is touched, and we tell you when a repair will serve you better than a replacement. Call (855) 914-9447 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Burbank market as of 2026. Garage Door Repair Mount Greenwood offers free estimates – call (855) 914-9447.
Written by the team at Garage Door Repair Mount Greenwood.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Daniel Thompson"Asked a lot of questions before he came out, which I thought was a good sign. Turned out he was right about what the problem probably was, so it was a quick fix once he got here."
- Laura Padgett"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Lisa Whitaker