Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Beverly?
Garage door work in Beverly typically costs $150 – $600, depending on what’s actually wrong. A single spring replacement runs $180 – $340, a cable repair $130 – $250, and an opener repair $120 – $320. A new door installation is a separate budget entirely, at $700 – $2,200. Those are typical estimated ranges for the Beverly market; the written estimate you get after a diagnosis sets the final price.
We’re garage door specialists, not a general handyman outfit. That matters on cost: a specialist diagnoses the actual failed component and replaces it, where a generalist may quote you a whole new door because they can’t isolate the problem. We answer 24/7 at (855) 914-9447, and every estimate is free.
Key Takeaways
- Most Beverly repair jobs land between $150 and $600.
- Springs are priced per spring: one spring is $180 – $340, and a matched pair is usually replaced together at about twice that.
- A new door ($700 – $2,200) is often avoidable. Panel, track, roller and opener repairs are far cheaper and restore what you already have.
- Our technicians have up to 10 years of experience, and they’re factory-familiar with eight major manufacturers, so diagnosis starts with the brand, not a guess.
- Estimates are free and the written quote sets the price.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break down by job type for Beverly homeowners. These are typical estimated ranges, not exact quotes.
| Job | Typical Estimated Range | Notes |
|---|---|---|
| Garage door repair (general) | $150 – $600 | The lead range for most single-visit repairs |
| Spring repair | $180 – $340 | Per spring; a matched pair runs about twice |
| Cable repair | $130 – $250 | Usually bundled with spring work when both have failed |
| Opener repair | $120 – $320 | Board, gear, sensor, or logic faults |
| Opener installation | $250 – $550 | New unit, existing wiring |
| Panel replacement | $250 – $500 | Single damaged section, matched to your door |
| Track realignment | $120 – $240 | Bent or knocked track after impact |
| Roller replacement | $110 – $220 | The quietest, cheapest fix on the list |
| New door installation | $700 – $2,200 | Depends on door size, material, and opener |
What pushes a job toward the top of a range? Multiple failed components at once, a door that needs new hardware throughout, or a heavier door that takes longer to balance safely. What keeps it low? A single worn part, a door that’s structurally sound, and a brand we know inside out. The opener side deserves its own note: we treat opener repair as a specialty rather than defaulting to a new unit. LiftMaster, Chamberlain, and Genie boards are diagnosable, and the older Craftsman and Wayne Dalton drive systems still have parts available through our parts supply, so a repair is often the smarter spend.
What Affects Garage Door Pricing in Beverly
Two garages on the same block can quote differently. Here’s why the price moves:
- How many components failed together. Springs, cables, and rollers wear on a similar timeline. If one spring has snapped, the other is usually not far behind, and the cables that just took the shock load often need replacing too. We price per job so you’re not paying for two visits.
- The spring system you have. Torsion springs mounted on a shaft above the door and extension springs that run along the sides are different jobs with different tools. We handle both, which is less common than it should be since high-tension spring work carries real risk and many generalists decline it.
- Door brand and hardware fit. Panels and rollers aren’t universal. Because we work with Clopay, Amarr, Wayne Dalton, Raynor, and the opener brands on the control side, we source the right component instead of improvising a fit.
- Parts availability. This is where a stalled repair gets expensive in time. We source and stock components as part of the service, which cuts the “we have to order that” gap that leaves a door stuck open or stuck shut.
- Track and structural condition. A door hit by a car or pulled off its track needs realignment ($120 – $240) plus a check that the panels aren’t torqued. Serious track damage can push a job toward the upper end of the repair range.
- Installation scope. A new door’s cost depends on size, material, insulation, and whether you’re adding an opener ($250 – $550 installation) alongside it. Removal and disposal of the old door is part of the conversation.
Is It Cheaper to Repair or Replace?
Repair is cheaper in almost every case where the door’s panels and frame are sound. A $250 panel replacement or a $220 roller swap is a fraction of a $700 – $2,200 new door, and it keeps the door that already fits your opening. Replacement makes sense when multiple panels are crushed, the door is rusted through in a way that can’t be patched, or you’re changing the door’s function (adding insulation, going from a manual door to an opener-driven one). Our default is to restore what you have and only recommend a new door when the repair math stops working. If you’re weighing it, garage door repair Mount Greenwood walks through the same part-or-replace call.
How to Save on Garage Door Work in Beverly
You can’t cut the cost of a spring by shopping around, but you can avoid paying twice.
- Get the diagnosis before the quote. A free estimate tells you which component failed. A quote for “a new door” when the real issue is a worn roller is money lost.
- Replace paired components together. If one spring snapped, doing the pair in one visit costs less than two separate jobs, and you’re not back next month for the second one.
- Fix the opener, not the whole unit. If the motor runs but the door doesn’t lift, the problem is often a gear, board, or sensor (opener repair $120 – $320) rather than a new unit ($250 – $550).
- Handle rollers and tracks early. A rumbling door is telling you the rollers ($110 – $220) or track alignment ($120 – $240) need attention before the strain reaches the springs.
- Ask for a written estimate. Every job we quote comes with one, and that written estimate sets the final price. No surprise line items.
Estimates are free. Call (855) 914-9447 and we’ll get a technician out to diagnose the door and quote the job in writing.
Can You Come Today?
Often, yes. We run same-day service and fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. If a door fails on a Saturday you can still call and we’ll book you into the next opening. We answer 24/7, so a call outside dispatch hours gets scheduled for the next slot rather than sitting unanswered.
FAQs – Garage Door Cost
How much does garage door repair cost in Beverly?
Garage door repair in Beverly typically runs $150 – $600 for a single visit, depending on which components failed. Spring repair is $180 – $340 per spring, cable repair $130 – $250, and opener repair $120 – $320. The written estimate after diagnosis sets the final price. Call (855) 914-9447 for an exact quote. Estimates are free.
How much does a new garage door cost in Beverly?
New door installation in Beverly typically runs $700 – $2,200, driven by door size, material, insulation, and whether an opener is added at the same time. Opener installation alone is $250 – $550. That’s a big spend, so we diagnose first: many doors people think need replacing only need a panel, roller, or track fix. Call (855) 914-9447 to find out which side of that line you’re on. Estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is cheaper in nearly every case where the panels and frame are structurally sound. A panel replacement ($250 – $500) or roller replacement ($110 – $220) costs a fraction of a new door at $700 – $2,200. Replacement is the right call when multiple panels are crushed or the door is beyond patching. Call (855) 914-9447 and we’ll tell you honestly which one you need. Estimates are free.
Why do springs cost more when they’re replaced as a pair?
Because a pair is two springs. A single spring is $180 – $340, and since a matched pair is usually replaced together, a pair runs about twice that range. Replacing both at once is still cheaper than two separate visits when the second one fails. Call (855) 914-9447 to get the right pair quoted. Estimates are free.
Do you charge more for same-day or after-hours service?
No emergency or same-day premium is added. The price is set per job by the written estimate, and we treat same-day and scheduled work the same way on the invoice. We answer 24/7 at (855) 914-9447, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
A Note on Safety
The two most common reasons a Beverly door stops working are the springs and the cables, and both are under high tension. A torsion spring under load can cause serious injury if it’s handled without the right tools and training, and cables can snap back unexpectedly. We don’t recommend attempting spring or cable work yourself. This is exactly why many generalists decline the job and refer it out. We do it as a core service because it’s the part of the trade that deserves the most care. Our technicians have up to 10 years of experience with high-tension systems, and the parts we fit are the correct ones for your door brand, not an approximation.
Why Brand Familiarity Keeps Your Cost Down
Every dollar of a garage door bill is time plus parts. When a technician has to look up your door, find the schematic, and guess at the right component, you pay for the guessing. We’re factory-familiar with eight major manufacturers: LiftMaster, Chamberlain, and Genie on the opener side, and Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor on the door and hardware side. Craftsman and Wayne Dalton doors from the mechanical era get the same fluent handling as a current LiftMaster or Chamberlain smart opener. Brand-specific diagnostics means the parts get sourced once and the job gets done once.
That also covers the full lifecycle. Repair, opener repair, panel work, roller and track service, parts, and full installation all happen within one company, so there’s no handoff between vendors when a door needs both a spring and an opener fix in the same visit.
What Happens When You Call
You call (855) 914-9447. We answer 24/7. We ask a few questions about the door, the brand, and the symptom, then schedule a visit. On site, a technician diagnoses the actual failed component, confirms whether any related hardware is close to failure, and writes you an estimate with the line items spelled out. The written estimate sets the final price. If the fix is a $180 spring, that’s the quote. If the door genuinely needs replacing, you’ll see that spelled out too, with the reasoning behind it.
We pay particular attention to Beverly’s seasons as they affect door hardware: the freeze-thaw cycles and the temperature swings between summer and winter put repeated stress on springs and on the metal of the door and track. A door that bangs or shudders on opening is telling you something’s loose or worn, and catching it at the roller or track stage ($110 – $240) keeps it from reaching the springs.
Schedule a Free Estimate
Garage door work in Beverly doesn’t have to be a mystery number. The typical range is $150 – $600 for repair, $700 – $2,200 for a new door, and we quote in writing before any work starts. Our technicians have up to 10 years of experience, we service all major brands, and spring repair is a core service rather than a referral. Call (855) 914-9447 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. If your door is stuck right now, call and we’ll book you into the next available opening.
Pricing reflects the Beverly market as of 2026. Garage Door Repair Mount Greenwood offers free estimates – call (855) 914-9447.
Written by the team at Garage Door Repair Mount Greenwood.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Daniel Thompson"Asked a lot of questions before he came out, which I thought was a good sign. Turned out he was right about what the problem probably was, so it was a quick fix once he got here."
- Laura Padgett"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Lisa Whitaker